Two Dangbei Projectors, Two Rooms: Meet the MP1 Max and N3 Max

On September 22, the first Dangbei projectors ship from our Canadian warehouse — two of them, built for two different rooms. The MP1 Max is the 4K triple-laser one for the living room, $1,980 until the 22nd and $2,499.99 after. The N3 Max is the one that points at the ceiling above your bed, $550 until the 22nd and $699.99 after. Here is what each is, what each isn’t.

The living room: Dangbei MP1 Max

What it is, in one paragraph

A full-size 4K laser projector. The light engine is a hybrid — three lasers plus an LED — rated at 3,100 ISO lumens, with colour that covers 110% of BT.2020 at a Delta E under 1 out of the box, the accuracy that used to need a calibrator’s visit. Google TV runs on the projector itself with the officially licensed Netflix app, so there is no streaming stick and no sideloading. Two HDMI 2.1 inputs (one with eARC), two 12 W speakers with Dolby Audio and DTS:X, HDR10+ and HLG, Blu-ray 3D with active glasses, a built-in stand that rotates 360 degrees and tilts 135, and Dangbei’s InstanPro AI doing focus, keystone and screen fit every time you move it. 5.6 kg, carrying case in the box, one-year Canadian warranty.

What 100 inches asks of your room

Less than you’d think. With a 1.2:1 throw ratio, a 100-inch picture needs about 2.7 metres of distance — the far side of an ordinary living room, a coffee table, a shelf. Dangbei rates it for 40 to 300 inches and recommends 80 to 150; the same unit that fills a condo wall at 90 inches fills a basement at 150. Try pricing a 150-inch TV for a home. Then notice the projector didn’t care. No mount to buy on day one; if the math still feels abstract, our What Is Throw Ratio? explainer turns it into a tape measure.

Why “licensed Netflix” is the sentence that matters

Ask anyone who bought an imported smart projector what happened when they opened Netflix. Plenty run Android with Netflix nowhere to be found, or found through a workaround that dies at the next update — licensing is per device, and many brands never get it. The MP1 Max ships with Google TV and Netflix officially licensed, alongside YouTube, Prime Video, Disney+ and the Google Play catalogue, with Google Assistant on the remote and Google Cast for your phone. It’s the difference between a projector and a smart TV that happens to be 120 inches.

Why “triple laser” — and why we won’t oversell it

Three lasers plus an LED give the MP1 Max both its brightness and its colour range, and they mean there is no lamp to replace — ever. What’s verifiable: no lamp, a sealed hybrid engine, and 3,100 ISO lumens from Dangbei’s own rating — enough that the picture holds up with the blinds open in the evening, and behaves like a proper home theatre once the lights go down.

The bedroom: Dangbei N3 Max

Why the ceiling, of all places

Every home has one wall nobody uses: the one above the bed. It’s flat, it’s pale, it’s the exact size of a movie, and until now pointing a projector at it meant a tripod, a stack of books, or a mount and a Saturday. The N3 Max has a 180-degree gimbal built into its base — tilt from −45 to 135 degrees, so straight up is just another angle. Kids’ rooms, sick days, the guest room at the cottage, the rainy Sunday: it’s the projector use people don’t know they want until they’ve done it once.

What $550 actually buys — from the spec sheet, plainly

•     A native 1080p picture, 60 to 150 inches, with 4K sources decoded down by the MT9660 chip, HDR10 and HLG supported. It’s not a 4K projector, and at ceiling-above-the-bed distances that matters less than the brochure people think.

•     1000 ISO lumens from a sealed LED engine — Dangbei’s own rating; enough for a bedroom with a lamp on, not a sunlit room. Sealed means no dust on the optics, no yellowing, no filter to clean.

•     Netflix built in, officially licensed, on VIDAA OS, alongside YouTube, Prime Video, Disney+ and more than 1,000 apps, with AirPlay and screen mirroring, and dedicated app buttons on the remote — the small thing that decides whether a kid can run it alone.

•     InstanPro AI setup: autofocus, keystone, screen fit and obstacle avoidance every time you power on or move it. The ceiling fixture is an obstacle; the projector routes around it.

•     Quiet enough to fall asleep to: under 28 dB by Dangbei’s figure, 3.6 kg with the stand, nightstand-sized.

•     Sound for the room, and for the house asleep: two 6 W speakers with Dolby Audio, HDMI eARC for a soundbar, and two-way Bluetooth 5.0 — which also sends audio to headphones, the feature that makes midnight ceiling movies neighbour-proof.

Which one is yours?

	MP1 Max	N3 Max
Room	Living room, basement, media wall	Bedroom, kids’ room, guest room, ceiling
Picture	4K UHD, 3,100 ISO lumens, triple laser + LED	Native 1080p, 1000 ISO lumens, LED
Streaming	Google TV, licensed Netflix	VIDAA OS, licensed Netflix, AirPlay
Sound	2 × 12 W, Dolby Audio + DTS:X, eARC	2 × 6 W, Dolby Audio, eARC, Bluetooth to headphones
Stand	360° rotation, 135° tilt	180° gimbal, −45° to 135°
Weight	5.6 kg (carrying case included)	3.6 kg with stand
Price until Sept 22 / from Sept 22	$1,980 / $2,499.99	$550 / $699.99

What neither one is

•     The MP1 Max isn’t a pocket projector — 5.6 kg travels between rooms or to the cottage, not in a backpack.

•    The N3 Max isn’t a 4K theatre — if that’s the dream, it’s the MP1 Max, and we’d rather send you there than sell you the wrong one.

 

Movie night, solved: box to picture in about fifteen minutes

Timing below is our estimate from the spec sheets, not a stopwatch.

Minute 0–3: out of the box

Both ship with what you need and nothing you don’t: projector, power, a Bluetooth remote with batteries, the manual — and for the MP1 Max, an EPP carrying case. Neither needs a mount or a tripod on day one, because the stand is part of the projector: 360-degree rotation and 135-degree tilt on the MP1 Max, a 180-degree gimbal (−45 to 135 degrees) on the N3 Max. Coffee table or nightstand, pointed at the wall or the ceiling. That’s the mounting step.

Minute 3–6: the projector does the hard part

Power on and Dangbei’s InstanPro AI runs autofocus, auto keystone, screen fit and obstacle avoidance — the image squares itself, sharpens itself, shrinks to miss the light switch. Move the projector and it does it again. Honest note: physical placement still beats digital correction, so nudge the unit until the picture is roughly where you want it before letting the software polish. Size is set by distance — both throw at about 1.2:1, so 100 inches lands at roughly 2.7 metres.

Minute 6–10: sign in once, never again

This is where imported projectors usually fall apart, and where these two don’t. The MP1 Max runs Google TV with the officially licensed Netflix app; the N3 Max runs VIDAA OS with Netflix licensed and preinstalled. Sign in once — Netflix, YouTube, Prime Video, Disney+ — and they stay. No stick, no sideloading, no “Netflix not supported on this device.” Google Cast (MP1 Max) or AirPlay (N3 Max) handles the vacation photos from your phone.

Minute 10–15: sound, honestly ranked

•     Built-in (free): the MP1 Max’s two 12 W speakers with Dolby Audio and DTS:X carry a movie night; the N3 Max’s two 6 W with Dolby Audio carry a bedroom. Real speakers, not afterthoughts — and still speakers inside a projector.

•     Headphones (free with your pre-order): both projectors send audio over Bluetooth, and the HP-TW45 open-ear earbuds included until September 22 are exactly right for a midnight movie in a sleeping house — ears open, nobody woken.

•     A Bluetooth speaker ($89.99): for backyard nights, Sharp’s GX-BT390 pairs in seconds and sounds like the picture deserves.

•     The real upgrade ($649.99): one HDMI cable from the eARC port to Sharp’s HT-SBW53121 — a 3.1.2 Dolby Atmos bar with a wireless subwoofer — and movie night becomes the reason the neighbours come over. Our HDMI ARC setup guide and Dolby Atmos explainer cover why that one cable matters.

 

The three mistakes that wreck night one

•     Watching in daylight. No projector wins against a sunny window; even 3,100 ISO lumens wants the blinds drawn for its best. Plan for dusk.

•     Projecting onto texture. Orange-peel drywall shows at 100 inches. A smooth, pale wall works; a screen is the upgrade to make when the habit sticks.

•     Digital-zooming to size. It throws away pixels. Move the projector, don’t shrink the picture.

 

The launch, stated plainly

Both ship September 22 from a Canadian warehouse with free shipping across Canada, a one-year Canadian warranty and 30-day returns. Until then, the launch prices are authorized by Dangbei below the regular Canadian prices that take effect on the 22nd, and every pre-order ships with a free pair of Sharp HP-TW45 open-ear earbuds ($119.99 value), limit two per order. No countdown theatre, no “only 3 left.” The date is the deadline.

Frequently asked questions

When do the Dangbei MP1 Max and N3 Max ship in Canada?

September 22, 2026, from a Canadian warehouse. Pre-orders placed before then ship that day, with free shipping.

Do they need a streaming stick?

No. Netflix is officially licensed on both — Google TV on the MP1 Max, VIDAA OS on the N3 Max — with YouTube, Prime Video and Disney+ alongside.

Is the MP1 Max native 4K?

It delivers a full 3,840 × 2,160 image from a 0.47-inch DMD chip using pixel-shifting, the standard approach in this class. It’s 4K on screen.

Can the N3 Max really project onto a ceiling?

Yes — the integrated gimbal tilts to 135 degrees, and auto-keystone and screen-fit square the image at that angle. No tripod or mount required.

Do I need a mount or a streaming device?

Neither. Both projectors have the stand built in, and Netflix and the major apps are officially licensed on both. Sign in once and they behave like a smart TV.

Can I connect a soundbar?

Yes — both have HDMI eARC. One cable to a bar like the Sharp HT-SBW53121 and the picture gets the sound it deserves.

The bottom line

If the picture in your head is a wall, the MP1 Max at $1,980 is the most complete way we know to get there. If it’s the ceiling above the bed, the N3 Max at $550 turns the one wall nobody uses into the best seat in the house. Either way, the evening it arrives is about fifteen minutes of the projector doing the work while you find the remote. Both are on the Dangbei launch page with the terms stated exactly as they are here — pre-order before September 22, or don’t, but decide with the real numbers in front of you.

 

Sources

[1] Dangbei MP1 Max and N3 Max — clavia.ca product pages and Dangbei launch page (specifications, in-box contents, prices, terms verified September 10, 2026).

[2] Dangbei MP1 Max / N3 Max — manufacturer specifications (dangbei.com).

[3] Sharp HT-SBW53121 and GX-BT390 — clavia.ca product pages (prices verified September 10, 2026).

[4] Netflix device licensing — Netflix Help Center (supported devices).